CUT100 CNC
CREPOW RANGE
Industrial
Input voltage can be Single Phase 220Volts or Three Phases 380Volts Input
Pilot Arc Start increases cutting capability and cutting speed, it also improves working life of torch parts
90% High Duty Cycle at 60amps and 40°C
Arc is started Without High-frequency, so it will not disturb or damage controllers or computers
Grid Cutting is available
Air Flow Checking function is included
CNC Cutting Function and Connector is optional
Built-in protection Circuit of over temperature and over voltage and over current for better reliability
Generator friendly allows to work with diesel generators and avoid failures due to its voltage spikes
Optional Accessories:
Earth cable and clamp
S65-4m #00.2828.02
SC-60-6m #00.2655
SCM-120-8m #00.2656.02
Output / Input
Processes
PLASMA(PAC)
CUT100 CNC
CREPOW RANGE
Industrial
Input voltage can be Single Phase 220Volts or Three Phases 380Volts Input
Pilot Arc Start increases cutting capability and cutting speed, it also improves working life of torch parts
90% High Duty Cycle at 60amps and 40°C
Arc is started Without High-frequency, so it will not disturb or damage controllers or computers
Grid Cutting is available
Air Flow Checking function is included
CNC Cutting Function and Connector is optional
Built-in protection Circuit of over temperature and over voltage and over current for better reliability
Generator friendly allows to work with diesel generators and avoid failures due to its voltage spikes
Optional Accessories:
Earth cable and clamp
S65-4m #00.2828.02
SC-60-6m #00.2655
SCM-120-8m #00.2656.02